COXREELS
CHALLENGER SERIES REELS
Coxreels roller bracket assemblies for the Challenger Series. The function of the roller bracket is to assist in guiding the hose during both extension and retraction. The roller bracket assembly is available only in a four-way upper roller format, due to the compact size of the Challenger platform. For 12” disk Challenger models, the roller bracket assembly is available for 8” wide drums and 12.5” wide drums. For 17” disk Challenger models, the roller bracket assembly is available for 8” wide drums, 12.5” wide drums, and 18” wide drums.
HILLTIP
ICESTRIKE COMBI SPREADER
Hilltip IceStriker 8000 CM Combi Spreader is a truck-mounted unit that is fully electric powered. It can be powered by 12- or 24-volt dual motors, which are mounted inside a sealed, weather-resistant enclosure. An automatic GPS speed control adjusts the material rate according to vehicle speed. It works with Hilltip’s HTrack tracking software. The integrated liquid tank has a 370-gallon capacity for pre-wetting material, and a spray bar can be added for de-icing applications, as well as a 40-foot hose reel for spraying hard-to-reach areas. The spreader has a stainless-steel auger, and the modular hopper body is made of polyethylene. It also includes an inverted V with a vibrator to help prevent bridging. Other standard features include built-in tie-down loops, a top screen, tarp kit, and an accessory wire.
GRAY TOOLS
FULL LINE OF INSULATED HAND TOOLS
Gray Tools full line of insulated hand tools consists of over 275 products, including both sets and loose tools. Gray’s insulated line includes ratchets, sockets, wrenches, screwdrivers, nut drivers, pliers, hex keys and hacksaws, as well as a selection of uncommon tools. Various styles and sizes, including SAE and metric, are available. Each tool features a dual-colored insulation. If the outer orange layer of insulation becomes damaged, an inner yellow layer alerts the user that the tool is no longer safe for use. Gray’s insulation process meets or exceeds ASTM F1505 standards for insulating adhesion, dielectric properties, flammability and durability. When the process is completed, each tool is charged with 10,000 volts of energy for 180 seconds to ensure its insulation resists potential electric shock.
NEXIQ TECHNOLOGIES
ETECHNICIAN 2.12 UPDATE
NEXIQ Technologies eTechnician 2.12, which enables the latest bi-directional diagnostic support for PACCAR engines through MY 2024 and PACCAR body and chassis modules for MY 2020 and newer. The update also supports Detroit engines through MY 2024, Ford engines through MY 2024, Freightliner Cascadia body and chassis modules, and Eaton and PACCAR transmissions. A wide range of new Ford commercial vehicle support includes coverage for 2022 – 2024 F-Series trucks and E-Series vans as well as Transit and Transit Connect vehicles. ETechnician 2.12 can read proprietary Freightliner body and chassis fault codes and parameters from 2013 – 2024. This includes support for the transmission control module, central gateway, maintenance system and more.
